Pressure reducer up to 2.1 Bar, 2 x internal cutting 3/4", DSA-8635 The pressure regulator in irrigation systems is a must-have as it provides protection against hydraulic shock, stabilizes the pressure at both ends of the freeway to optimum levels and ensures automatic connection of pumps, filters and other main nodes. The decrease in pressure is caused by the flow into a special labyrinth, which is located inside the hull and cuts off the flow. The flow reducer is installed after the valve or faucet. Pressure reduction: up to 2.1 Bar Type of connection: input: RV 3/4" Output: RV 3/4" * The correct operation of the reducer is guaranteed at a constant watering rate of at least 120 litres per annum (2 litres per cubic metre)! DSA-8410 1 - 5.2 0.7 - 1.2 282 - 336 DSA-84115 1 - 5.2 0.5 0.4 - 0.9 288 - 342 DSA-84220 1 - 5.2 1.7 - 1.4 288 - 420 DSA-84525 2 - 5 1.3 - 2.2 45 - 1380 DSA-84335 2 - 5 2.1 - 2.7 1182 - 1938 DSA-8445 3 - 6.8 2.6 - 3.5 340 - 1500 DSA-8515 1.3 - 8.3 0.9 - 1.1 660 - 1750 DSA-85535 2.7 - 8.3 1.9 - 2.2 660 - 2435